|
FTS-2 Optical Modelling
-
SCUBA-2 feed optics ZEMAX model, up to the FTS: SCUBA-2_optics.zip
-
Zemax model of the FTS-2 Optics as of March 2007: IFTS_draft_6_9.zip
-
Optical prescription for FTS-2 optics: FTS-2_prescription.txt
Note that this is just for one 'side' of the FTS.
-
INO report for the FTS-2 optical design: INO 060140 R-11c.pdf (28 MB)
-
Reverse raytracing was done to determine the actual view from the SCUBA-2 arrays with the FTS in the beam.
The following animations show the spillover (on one side of the interferometer)
as a function of mirror travel from -200 to 200 mm and back again. Refer to the INO report for details
of the reverse raytracing.
-
Spillover effects in the entire interferometer: spillover.avi (6 MB)
-
Spillover effects on the input pickoff mirror: PO1.gif
-
Spillover effects on the beamsplitter: BS.gif
-
Spillover effects on mirror FM1_3: FM1_3.gif
-
FTS-2 Port Optical Coordinates: SC2/FTS/OPT/002
Please send any comments or questions to
|
SCUBA-2 FTS Group
Physics Department
University of Lethbridge
4401 University Drive
Lethbridge, Alberta
T1K 3M4
Phone: (403) 329-2771
Fax: (403) 329-2057
|
|